Deioniser Lab
Product Code : LSK-CL-10054
Deioniser Lab (SKU LSK-CL-10054) is a cartridge water deioniser that purifies tap water for laboratory use. It contains mixed-bed ion-exchange resin that changes colour as it becomes exhausted, connects to the tap with flexible tubing and delivers up to 10 litres of deionised water per hour. School, college and training laboratories use it for preparing solutions and rinsing glassware. Science Lab Supplies delivers the unit from Ambala, India to schools, colleges, training institutes, tender contractors and distributors.
Specifications
The deioniser is a single cartridge whose inlet and outlet accept flexible tubing, so it runs directly from a tap without a pump. Its mixed-bed colour-change resin shows at a glance when the cartridge is exhausted, and the output water is specified for conductivity, pH and dissolved solids as listed below.
| Parameter | Value |
|---|---|
| SKU | LSK-CL-10054 |
| Resin | Mixed bed, colour change to indicate cartridge exhaustion |
| Feed | Directly from tap water |
| Connections | Cartridge inlet and outlet accept flexible tubing |
| Typical output / maximum flow | 10 litres per hour |
| Output conductivity | 0.06 to 10 µS/cm |
| Output pH | 6.5–7.5 |
| Dissolved solids | Less than 0.5 ppm |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Lab Deioniser
The deioniser provides purified water wherever tap-water ions would spoil a result. Typical uses are making up reagents and standard solutions, final rinsing of glassware, topping up instruments and preparing blanks for conductivity, pH and colorimetric measurements in teaching and routine laboratories.
- Class 11–12 chemistry: preparing titration and salt-analysis solutions.
- B.Sc. and diploma analytical labs: water for standards and blanks.
- Biology and microbiology labs: rinsing and solution preparation.
- Environmental science: demonstrating ion exchange and water purification.
Standard Scope of Supply
The Deioniser Lab comes complete with instructions, as a cartridge unit filled with mixed-bed colour-change resin and fitted with inlet and outlet for flexible tubing. Replacement cartridges or resin, if needed, are listed separately on the quotation.
Packing, MOQ and Lead Time
A single deioniser for one lab or units for several departments can be quoted. The quotation sets out packing, delivery time and price for the quantity you specify, and wash bottles or other laboratory glassware from our supplier range can join the same order.
Holding an Importer-Exporter Code, Science Lab Supplies is in a position to ship to buyers in Nigeria, Kenya, Ghana, Ethiopia, Tanzania and Uganda. For pricing, use the contact page or the enquiry cart; tendering institutions will find guidance on the lab tender page.
Frequently Asked Questions
How much water does the deioniser produce?
Its typical output and maximum flow rate is 10 litres per hour, fed directly from a tap through flexible tubing.
How do I know when the cartridge is exhausted?
The mixed-bed resin changes colour as it is used up, giving a visible signal that the cartridge needs replacing or regenerating.
Who supplies the Deioniser Lab?
Science Lab Supplies supplies the deioniser from Ambala, India, and can quote it with distillers, wash bottles and pH meters for a complete water station.
What water quality does it give?
The output is specified at a conductivity of 0.06 to 10 µS/cm, pH 6.5–7.5 and dissolved solids below 0.5 ppm.
Related Laboratory Water Equipment
These four items complete a laboratory water station: an alternative purification method, storage and dispensing of the purified water, and a meter to check it.
- Distiller for Distilled Water — purifies water by distillation.
- Mariot Bottle (for Distilled Water) — stores and dispenses purified water.
- Wash Bottle Lab — for rinsing glassware with deionised water.
- Bench pH Meter — checks the pH of the output water.
Browse the full Chemistry Lab range or all school lab equipment.
Last updated: 25 September 2026
.jpg)
