Electric Router
Product Code : LSK-WWM-10644
Electric Router (SKU LSK-WWM-10644) is a hand-held plunge router with an 1850 W motor that cuts grooves, rebates, housings and edge profiles in timber and board. Carpentry instructors use it in ITI, polytechnic and TVET woodworking workshops to teach joint-making and edge finishing. Science Lab Supplies supplies it from Ambala, India to vocational schools, training institutes, tender contractors and distributors.
Specifications
This router has a 15 A motor rated at 1850 W and a no-load speed of 23,000 rpm. Its 1/2 in (12.7 mm) collet takes 1/4 in or 1/2 in shank bits, plunge capacity runs from 0 to 2-3/8 in, three preset plunge depths speed up repeat cuts, and the construction uses ball bearings throughout.
| Parameter | Value |
|---|---|
| SKU | LSK-WWM-10644 |
| Power | 1850 W, 15 A motor |
| No-load speed | 23,000 rpm |
| Voltage | 110 V / 60 Hz |
| Collet | 1/2 in (12.7 mm); takes 1/4 in or 1/2 in shank bits |
| Plunge capacity | 0 to 2-3/8 in (about 60 mm) |
| Depth setting | 3 preset plunge depths; top-handle adjustment |
| Bit change | Shaft lock |
| Bearings | All ball bearing construction |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Electric Router
The router is used for practical exercises in cutting housings, grooves, rebates and moulded edges, and for trimming joinery parts to a set depth. It suits carpentry and joinery training at ITI, polytechnic and TVET level, where trainees learn to set cutting depth, choose bits and guide a power tool under control.
- ITI Carpenter trade: routing grooves, rebates and housing joints for frames and cabinets.
- TVET carpentry and joinery modules: profiling the edges of furniture components.
- Furniture and cabinet-making courses: trimming and shaping parts with guided bits.
Standard Scope of Supply
The Electric Router is supplied as a single unit as described above, with the 1/2 in collet listed in the specification table. Router bits are consumables that each workshop chooses for its own exercises; if you need them or any optional accessories, ask for them to be added to the quotation.
Packing, MOQ and Lead Time
You can ask for a quotation for one router or for a complete woodworking workshop quantity, and each quotation from Science Lab Supplies sets out packing, delivery time and price for that quantity. Planers, sanders and other TVET workshop equipment can be listed on the same quotation.
As a registered exporter with an Importer-Exporter Code, Science Lab Supplies can ship to buyers in Malaysia, Peru, Egypt, Iraq, Nigeria and Kenya. Science Lab Supplies is registered for GST (GSTIN 06ADEPJ0574F2ZU). Questions about the router can go through the contact page, a workshop list can be built in the enquiry cart, and tender buyers will find details on the lab tender page.
Frequently Asked Questions
What is an electric router used for in a training workshop?
It cuts grooves, rebates, housing joints and edge profiles to a controlled depth, so trainees learn machine joinery and edge finishing. It is one of the standard workshop tools for technical training institutes.
Which router bits does this model accept?
It takes bits with a 1/4 in or 1/2 in shank, held in the 1/2 in (12.7 mm) collet. The shaft lock holds the spindle still while a bit is changed; unplug the tool first.
Does this router run on 230 V mains?
The specification lists 110 V / 60 Hz. Tell us your workshop mains supply through the contact page before ordering, so the quotation states clearly which voltage the offered unit is built for.
Who supplies the Electric Router?
Science Lab Supplies supplies it from Ambala, India, to ITIs, polytechnics, vocational schools, tender contractors and distributors.
Related Woodworking Workshop Machines
These four portable power tools from the same range cover planing, curved cutting, sanding and drilling, the operations that usually come before or after routing a joint or an edge, and all of them can go on one quotation with the router.
- Portable Planer — brings stock to size before edges are routed.
- Jig Saw Machine — cuts curved outlines that are then profiled.
- Orbital Sander Machine — smooths routed faces before finishing.
- Power Hand Drill — drilling and screwing when routed parts are assembled.
Browse the full Woodworking Workshop Machines range or all TVET lab equipment.
Last updated: 25 September 2026
